Huawei Mate 40 Pro design appeared


Render images with the Huawei Mate 40 Pro design appeared. The company, which continues to work on new models in the shadow of prohibitions and embargoes, aims to meet users with the Mate series.

Render images of the Mate 40 design have already appeared. The images for both models showed how the design would be. The models will have a circle-shaped camera design on the back as before.

Huawei Mate 40 Pro design

When the leaked images are examined, it is seen that the model has a curved screen design. However, it is seen that the camera hole is located in the upper left part of the screen. At this point, the dual camera setup appears to be positioned. It is also stated that there are two sensors on the front, one of which is infrared.

Looking at the back of the model, it is seen that the cameras are gathered in a circle section. It is seen that the power and volume on / off keys of the model are positioned on the right side, and the location of these keys is marked in the Huawei Mate 40 Pro design.

It is seen as an advantage that the new model that will meet the users is notch. Instead of a notch, there is a thin black section. This section is also located at the bottom. Thus, where the screen starts and ends can be easily understood.

It was stated in the information leaked earlier that the model would be 162.8 mm x 75.5 mm x 9 mm. It is also said that the model will use Kirin 1020 with a 5 nm fabrication process as the processor.

See Also
Huawei Mate 40 Pro leaks with large set of rear cameras

As before, this model does not include Google Play Services. Huawei Mobile Services, developed as an equivalent to this system, will try to meet the needs of users.


Please enter your comment!
Please enter your name here